Page 1 of 1

Mod circuits from Daveplaysbass

PostPosted: Wed Dec 27, 2017 4:31 pm
by Ken Baker
This is the place to look for circuits from Daveplaysbass, the gentleman who originally created all the single coil (non-K model) mods.

Ken...

Re: Mod circuits from Daveplaysbass

PostPosted: Wed Dec 27, 2017 7:19 pm
by daveplaysbass
Here is the latest version of the Coil Mod document. From best I can tell this is Version 4 which was recently updated. There is a new mod in this one that uses a push-pull volume pot along with the 3 position coil switch. It gives both Single Coil options along with Series and Parallel.

COIL MOD DOCUMENT Version 4.1
https://drive.google.com/open?id=1JDqxz2bWiiV_kq0QY0DqeLVZ7HlWHEIH


As of 12/28/2017 here is an updated Preamp Mod version with a huge bloviation opamps for those who care. If nothing else this gave me a chance to collect multiple thoughts in one place. I have found over the years that explaining an engineering problem to someone else forces me to think through it better. This document drove me into some corners a little more than I had done previously. Also, after taking the engineering manager lobotomy six years ago, I think I am missing the gory details of circuit design. And I am hoping the lobotomy was not 100% successful -:).

PREAMP MOD DOCUMENT Version 2.2
https://drive.google.com/open?id=1hwnRvHrkf1x-eweWK164SLw85YUUO_uG


Here is a detailed document of what I am calling the "Super Mod" which is Coil Mod 10.1 and Preamp mods with pictures, graphs, and charts.

SUPER MOD DOCUMENT VERSION 2 (UPDATED 3/21/2020)
https://drive.google.com/file/d/1cRxzzFhpfnheV-91Xwpn8uvW-LSDxXOE/view?usp=sharing

Re: Mod circuits from Daveplaysbass

PostPosted: Thu Mar 28, 2019 4:10 pm
by godblender
^^^^ These are outstanding and include the exact wiring schematics I've been looking for the past week. Thank you.