M2000 pickup wiring

We are fortunate to count Paul Gagon as a member here, so it seemed natural to give him a home to stretch out in and relax a little. Maybe exercise the grey matter and present a little history of the guitar and bass (amps too!) from his perspective as one of the eminent designers of our time.

Got questions? Great! Good questions might be, "What are the EQ mappings for the M Series preamps?" Or, "What was the thought process behind the MJ-4?" Troubleshooting questions should remain in the regular forums (he reads those too). Finally, please be mindful of how I feel about tech questions via PM or email.

Moderator: Paul Gagon

M2000 pickup wiring

Postby Funky_punky » Tue May 21, 2019 2:35 am

Hi, I need wiring m2000 pickups. Can you please tel me? white it’s a south finish coil , black - south start. Yellow - north finish, green - North start. It’s a right ? Thank you.
Attachments
F9927B0F-8B32-40E6-9299-C645496DFFF6.jpeg
F9927B0F-8B32-40E6-9299-C645496DFFF6.jpeg (60.53 KiB) Viewed 1428 times
Funky_punky
 
Posts: 5
Joined: Sun Oct 08, 2017 7:47 pm

Re: M2000 pickup wiring

Postby daveplaysbass » Tue May 21, 2019 6:39 am

I would guess the same way you have stated. The wire colors are different than the L2000 which are green/yellow and black/white. For the L2000, green and black are both starts. And the green is "ground" for the later wiring schemes where that matters. I am guessing they switched up the yellow and white "finish" on the M2000 pups so they could tell them apart on the manufacturing line.
Last edited by daveplaysbass on Sat May 25, 2019 10:09 am, edited 1 time in total.
User avatar
daveplaysbass
 
Posts: 32
Joined: Sat Dec 09, 2017 10:28 pm
Location: Colorado

Re: M2000 pickup wiring

Postby Funky_punky » Wed May 22, 2019 3:17 am

I understand. Thank you
Funky_punky
 
Posts: 5
Joined: Sun Oct 08, 2017 7:47 pm


Return to Paul's Technicalities

Who is online

Users browsing this forum: No registered users and 1 guest