SB-2 Hex/Allen wrench size

Seeing as how we are fortunate to count Paul Gagon as a member here, it seemed like a good time to give him a home to stretch out in and relax a little. Maybe exercise the grey matter and present a little history of the guitar and bass (amps too!) from his perspective as one of the eminent designers of our time.

Got questions? Great! Good questions might be, "What kind of windings are on the S500 pickup and why?" Or, "What was the thought process behind the MJ-4?" Troubleshooting questions should remain in the regular forums (he reads those too). Finally, please be mindful of how I feel about tech questions via PM or email.

Moderator: Paul Gagon

SB-2 Hex/Allen wrench size

Postby Conrad » Sun Aug 05, 2018 9:12 am

Hi there, Super silly question but I need to adjust the truss rod on my 2009 USA SB-2 for the first time in.... well years : )
In the intervening years my trusty Allen/Hex wrench has disappeared so I'll need to know the size before I pop down to the hardware emporium.
Many Thanks, Conrad
St. Ives UK
Conrad
 
Posts: 1
Joined: Sun Jul 29, 2018 2:31 am

Re: SB-2 Hex/Allen wrench size

Postby Ken Baker » Sun Aug 05, 2018 10:13 am

Conrad wrote:Hi there, Super silly question but I need to adjust the truss rod on my 2009 USA SB-2 for the first time in.... well years : )
In the intervening years my trusty Allen/Hex wrench has disappeared so I'll need to know the size before I pop down to the hardware emporium.
Many Thanks, Conrad
St. Ives UK


https://www.bassesbyleo.com/allen_wrenches.html

Ken...
User avatar
Ken Baker
Site Admin
 
Posts: 4076
Joined: Sat Oct 10, 2009 9:33 am
Location: 12 miles WSW of Fender Ave. Fullerton


Return to Paul's Technicalities

Who is online

Users browsing this forum: No registered users and 2 guests